Garage Door Cost Calculator

According to Angi 2026 data from 15,434 verified projects, the national average garage door replacement costs $1,231, with most homeowners paying between $754 and $1,707. Your price depends on material, size, insulation, type, and extras like openers. As a reference from this calculator, a budget steel single door runs about $750.00, while a premium wood carriage-house double with a smart opener can reach $7,221.50. Get 2 to 3 local quotes to confirm.

Angi 2026 reports single-car doors at $500 to $3,000 and double doors at $800 to $5,000 installed. A double door is not twice the price: in our model a standard steel single costs $750.00 while the same door in double width (16 ft) costs $1,200.00 - about 60 percent more. Two separate single doors ($1,500.00 for two steel singles) cost more than one double because each needs its own tracks, springs, and labor.

Steel is the cheapest mainstream material: a standard single steel door starts around $750.00 installed in an average-cost state. HomeAdvisor installed ranges per door: steel $650 to $3,200, aluminum $600 to $2,900, vinyl $800 to $2,500, fiberglass $800 to $2,700, wood $900 to $4,500, composite $650 to $4,800, and glass $2,500 to $8,000. Steel wins on value, but aluminum resists rust in coastal climates and vinyl never needs painting.

Plan on $300 for a chain-drive opener, $450 for a quieter belt-drive, or $700 for a smart Wi-Fi opener, per door - HomeAdvisor puts the full range at $200 to $1,300 depending on drive type and features. If your existing opener is under 8 years old and the repair is well under $250 to $500, repair usually wins; otherwise replace it with the door so the rail, springs, and motor are matched and warranted together.

Basic insulation (R-6 to R-8) adds about $180 per door and premium insulation (R-12 to R-18) about $450 per door. Angi prices insulated doors at $1,100 to $4,200 installed. Insulation is worth it for attached garages, living space above the garage, or cold climates - it cuts noise, stiffens the panels against dents, and keeps the garage 10 to 20 degrees closer to indoor temperature. R-values run from 0 (no insulation) to 20.

DIY saves roughly $350 per door in labor - for example, a steel single door drops from $750.00 pro-installed to about $400.00 DIY. But garage door torsion springs store enough energy to cause serious injury or death if mishandled, and a misaligned door can fall or jam. Most homeowners safely DIY the opener and cosmetic parts, and hire a pro for the door and springs. If you DIY, never work on wound torsion springs without the proper winding bars and training.

Angi reports labor at $200 to $500 per door, averaging $350, and it is usually bundled into the installed price rather than itemized. Removing and disposing of the old door adds $50 to $200 (we estimate $125). Labor runs higher in high-cost states - California multiplies costs by about 1.25 and Hawaii by 1.30 - and lower in states like Mississippi (0.85).

Garage door replacement is the highest-ROI remodeling project in the 2025 Zonda Cost vs. Value report: a standardized $4,672 project added an estimated $12,507 in resale value, about 268 percent. Applied to our midrange example of $2,843.75, that ratio implies roughly $7,612.72 in added resale value, a net gain of about $4,768.97. Actual payback varies by market, neighborhood price point, and how dated the old door looked.

Expect $175 to $400 or more per spring set (we estimate $275), with torsion springs costing more than extension springs. Springs are rated for about 10,000 cycles - roughly 7 to 10 years of normal use. A spring job is the most common garage door repair and the most dangerous DIY: wound torsion springs can kill. If the door is over 15 years old and springs plus panels need work, compare the repair quote against a new door (for example, a $275 spring repair vs. a $750.00 new steel door).

Carriage-house style multiplies the base door price by about 1.7: Angi ranges them from $1,200 to $8,000 installed. Our premium example - a wood carriage-house double with premium insulation, smart opener, window inserts, and old-door removal in Hawaii - totals $7,221.50. Steel carriage-style doors with stamped overlays give most of the look for far less than real wood.

Angi notes custom sizes add $200 to $1,000 over standard. Our model scales price by door area: a custom 10x8 ft aluminum roll-up with basic insulation and a chain opener in Texas estimates $1,782.61, versus about $850 for a standard single. Measure the rough opening carefully - doors are sold by opening size, not panel size - and confirm headroom and side room for the tracks before ordering.

Use the 50 percent rule: if a repair costs more than half of a new door, replace. Example: a $275 spring repair on a door whose replacement costs $750.00 is worth doing; a $500 panel-plus-cable repair on a 20-year-old uninsulated door is not. Replace when panels are dented or rusted through, the door lacks safety features like photo-eye sensors, or energy loss from an uninsulated door bothers you.

Steel and aluminum last 15 to 30 years, fiberglass 20 to 40, vinyl 25 to 35, and wood 15 to 35 with diligent sealing. Springs and openers wear out first (7 to 15 years). As a cost-per-year anchor, a $750.00 steel door lasting 22.5 years costs about $33.33 per year - cheaper per year than most appliances.

Labor rates and material delivery costs differ by market. Our regional multiplier runs from 0.85 in low-cost states to 1.30 in Hawaii. The same $750 steel single door estimates $900.00 in New York (1.20x) but $637.50 in Mississippi (0.85x). Always get 2 to 3 local quotes - regional multipliers are estimates, not quotes.